Clients, Racers, Engine Builders

Testimonials From Verified Users

Krista and I have onwed Titan Speed Engineering going into our 2nd year and we could not ask for better customers.

Means Racing started using Titan oil pumps in 2010. We have run thousands of laps on our blown alcohol combination in the mid to low 7-second range. One thing that has always been rock solid is our oil pressure during the run. It was nice to be able to remove our oil accumulator, as it was no longer needed.

Over the years, our pump has experienced some rapid disassembly of the engine during a run. When that happens, we send the pump in to get checked and cleaned, and it always comes back with a great bill of health.

When building other customers’ engines, they receive Titan pumps as well, as it is the heart of any solid engine combo.

Titan Speed Engineering oil pumps are the only pumps we’ll ever run.

Greg Means / Means Racing

Hello All, Just wanted to send a note about the service I received while looking for a 351 Cleveland Oil pump to use in my 1960 Falcon.

This was a new build for me, and I ordered an IFS kit to weld in place of the old suspension system. After welding this in I decided I wanted to go with a 351 Cleveland instead of a 302 based engine. I was told by the suspension supplier that it wasn’t a good idea as it required a lot of modifications. They weren’t totally wrong.

The oil pump of a Cleveland exits towards the rear of the engine, while the small block fords exit horizontally towards the passenger side of the vehicle. This directs the pump pickup towards the rack and pinion and makes it impossible.

I contacted Shawn at Titan Speed Engineering which was the right choice. He had a special pump that has the same exit as standard small block Fords. He took a lot of time sending pictures and working with me to make sure I could make it work.

I had a special pan built to my specs and it appears that it will shoehorn in with very little issue. Thanks for all you help Shawn, it made this project much easier. I’ll post pictures at a later date when final assembly starts. Ned Einsig.

Ned Einsig / Owner - Builder

Hello All, Just wanted to send a note about the service I received while looking for a 351 Cleveland Oil pump to use in my 1960 Falcon.

 

Reveiwer Name

Hello All, Just wanted to send a note about the service I received while looking for a 351 Cleveland Oil pump to use in my 1960 Falcon.

 

Reveiwer Name

Hello All, Just wanted to send a note about the service I received while looking for a 351 Cleveland Oil pump to use in my 1960 Falcon.

 

Reveiwer Name

Hello All, Just wanted to send a note about the service I received while looking for a 351 Cleveland Oil pump to use in my 1960 Falcon.

 

Reveiwer Name